WESTERN STATES MANAGEMENT GROUP LLC | B= | C | 06/11/2015 | All other required Final inspections are complete. (This is a computer generated result) | BERTW | BERTW | | B= | C | 4971268 |
WESTERN STATES MANAGEMENT GROUP LLC | B= | P | 06/09/2015 | . Additional Inspections Required (computer generated): External Agency Inspection F= by FIREDEPT is not Completed yet (Contact: 385-5982, x2), External Agency Inspection Z= by ZONING is not Completed yet (Contact: 719-385-5982). | BERTW | BERTW | | B= | P | 4969447 |
WESTERN STATES MANAGEMENT GROUP LLC | B= | P | 06/05/2015 | install accessible parking space signage -- Schedule a new Building Final when above items are complete. Additional Inspections Required (computer generated): External Agency Inspection F= by FIREDEPT is not Completed yet (Contact: 385-5982, x2), External Agency Inspection Z= by ZONING is not Completed yet (Contact: 719-385-5982). | BERTW | BERTW | | B= | P | 4967830 |
SUN ELECTRICAL | BSP | T | 06/05/2015 | PAID (REC#1266145) PLAN SPLICE FEE: $50 by: SHELBY for Electrical | SHELBY | SHELBY | | BSP | T | 4967539 |
WESTERN STATES MANAGEMENT GROUP LLC | BSP | T | 04/16/2015 | PAID (REC#1266071) ADDITIONAL PLAN REVIEW TIME: $50 From: DALEH | DALEH | DALEH | | BSP | T | 4937326 |
WESTERN STATES MANAGEMENT GROUP LLC | BSP | T | 04/10/2015 | PAID (REC#1255589) ADDITIONAL PLAN REVIEW TIME: $50 From: DALEH | DALEH | DALEH | | BSP | T | 4933431 |
WESTERN STATES MANAGEMENT GROUP LLC | BFR | C | 03/16/2015 | All interior wall framing complete / Changes to plans spliced into approved set. | JEREMYA | JEREMYA | | BFR | C | 4917481 |
WESTERN STATES MANAGEMENT GROUP LLC | BSP | T | 03/16/2015 | PAID (REC#1250529) PLAN SPLICE FEE: $50 by: DANM for Construction: Revise typical wall detail to show wood studs and add storefront detail with framing behind existing | DANM | DANM | | BSP | T | 4917332 |
WESTERN STATES MANAGEMENT GROUP LLC | BFR | P | 03/09/2015 | Wall details call out 3 5/8" metal studs, 2x4 wood studs were used. Will need letter accepting this in lieu of the approved details / Add anchor bolts at 12" from all wall breaks | JEREMYA | JEREMYA | | BFR | P | 4913273 |
SUN ELECTRICAL | E= | C | 06/05/2015 | | CRAIGS | CRAIGS | | E= | C | 4967584 |
SUN ELECTRICAL | E= | R | 05/27/2015 | plans need spliced with type and size of conductors pulled ---- manufacturer and model of fixtures --- whips from outlet to ballast is 16 awg , re circuit and lower breaker size to meet 240.5 | CRAIGS | CRAIGS | | E= | R | 4961145 |
SUN ELECTRICAL | ES | C | 05/12/2015 | Commercial Service: 1200 amp 4/w 120 /208 volt --- CT metered at the transformer --- needs CT'S wired and meter --- contractor to schedule swap over | CRAIGS | CRAIGS | | ES | C | 4952644 |
SUN ELECTRICAL | ER | C | 03/06/2015 | 2 interior walls -OK | CRAIGS | CRAIGS | | ER | C | 4912648 |
MICK HEATING & SHEET METAL CO. | H= | C | 06/01/2015 | MECHANICAL FINAL OK. | NANCY | NANCY | | H= | C | 4963780 |
MICK HEATING & SHEET METAL CO. | H= | P | 05/29/2015 | TEST AND BALANCE REPORT RECEIVED. STILL NEED SIGN AT RANGE. | NANCY | NANCY | | H= | P | 4963638 |
MICK HEATING & SHEET METAL CO. | H= | P | 05/29/2015 | MECHANICAL FINAL OK PENDING SIGN "FOR WARMING PURPOSES ONLY" BEING INSTALLED AT RANGE, REVIEW OF TEST AND BALANCE REPORT. | NANCY | NANCY | | H= | P | 4962937 |
MICK HEATING & SHEET METAL CO. | H= | P | 05/28/2015 | PROVIDE LADDER FOR ROOF ACCESS. INSIDE ALL OK, DO NOT NEED TO GET BACK INTO BUILDING AT NEXT INSPECTION. PROVIDE TEST AND BALANCE REPORT FOR EXTRACTION ROOM ONLY. NOTE: NO GAS CONTRACTOR REQUIRED ON THIS PERMIT, GAS TO NEW FURNACE WAS EXISTING, THIS CONTRACTOR CONNECTED BACK TO EXISTING LINE. | NANCY | NANCY | | H= | P | 4961937 |
MICK HEATING & SHEET METAL CO. | H16 | C | 05/13/2015 | NEED GAS CONTRACTOR ATTACHED AND INSPECTIONS CALLED | JERRYF | JERRYF | | H16 | C | 4953453 |
MICK HEATING & SHEET METAL CO. | HRP | C | 05/12/2015 | THIS INSPECTION WAS FOR REFRIGERATION PIPING ONLY - NEED ORIGINAL STAMPED APPROVED PLANS FOR ALL OTHER INSPECTIONS -STILL NEED ALL DUCT AND EQUIPMENT INSPECTIONS | JERRYF | JERRYF | | HRP | C | 4952949 |
MICK HEATING & SHEET METAL CO. | H16 | T | 04/16/2015 | PAID (REC#1258251) Trip fee to pay for consultation. 40 minute consultation with Mechanical and General Contractor. At present time there is no service access for the air handler. Will need revised/approved prints showing new location of condenser and furnace. Outside air for furnace will need a motorized damper or back draft damper installed if using a manual volume damper. Contractor is to find out what the range is for in the extraction room, will need a sign installed as to what purpose of range is. Will there be any exhaust/cooling of the lights being installed? If yes, prints will need to reflect this. Test and balance report will need to be submitted for extraction room to verify outside air meets equipment schedule.
| NANCY | NANCY | | H16 | T | 4937462 |
MARTINSON MECHANICAL, INC | PTO | C | 06/03/2015 | | JOEL | JOEL | | PTO | C | 4965623 |
MARTINSON MECHANICAL, INC | P= | C | 06/03/2015 | | JOEL | JOEL | | P= | C | 4965613 |